RespectabLe Customers：when you pLace order of marine ropes，pLease pay attention to foLLowing items。
　　1.The breakage strength is only the reference value for marine ropes．Take sizes of rope as the basis．
　　2.Measure ropes which are newly manufactured but not been used as the basis．
　　3.When ropes are put into application，they shall be impaired more and more clearly therefore wearing resisting sheath can be added when placing the order of ropes．
　　4.In case when ropes are under ideal condition:
　　①Temperature：the maximum temperature should be no higher than 50℃ but lower than 45℃．
　　②Ropes cannot be stored together with electrolytic copper and electrolytic aluminum．
　　③Ropes cannot be stored and contacted with chemical acid such as sulfur acid etc．
　　5.The linear density shown in the catalogue is the net weight of rope per meter．
　　6.For the sake of safe operation，our company provides a necessary value 0f pulling force．When placing the order please showing accurate diameter and length of the rope．Normally the standard length is 200m/110 fathoms(1 fathom=6 feet)or 220m/120 fathoms．Other length of the rope shall be decided depending or requirement when placing the order．
　　7. Ehen placing the order,please showing if one or bith ends of the rope should have loop,which size of the loop shall be and if the loop shall be wrapped by PVC cancass.
　　8. All ropes of our company have their certificate when leaving the factory and we can provide certificate of classification societies such as CSS,ABS,BV,NK,GL,LR,KR,RINA,RS etc.on request.
　　9.The polypropylene rope and polypropylene filament compound (thread)have no water absorbed and can be floated on water.The polyamide rope(nylon)can absorb water and sink under water while the polyester rope has no water absorbed but it can sink under water due to its heavy specific gravity.